Making an Automated Sorting Machine[]
The first step is to gather all the materials needed.
You will need:
11 x Conveyor Belts
4 x Manipulators
2 x Crates
2 x Rejectors
1 x Armbot
14 x Wiring
2 x Chests
Placement of Items[]
Layout of Sorting Machine
It is a 7x8x3 ( Including wires underneath the Conveyor belts and Armbot and the Rejectors )
Programming of the Armbot[]
With the robot facing South ( Down on the Minimap ). Place this code into an Encoder with a Disk in it.
Where Item = The ID of your item to go in the right Crate.
ROTATE -90 GRAB Item ROTATE 180 DROP ROTATE -90 REPEAT
Imprinting Rejectors[]
Next you need to make 2 Imprinting Codes. One to reject the Stuff on the left and another to reject the stuff on the right. The Right Rejector will reject stuff to go into the Left Crate whereas the Rejector on the left will put the other item into a relay until it is picked up by the Armbot.
Finished product[]
thumb|left|400px|Layout of Sorting Machine
 | This page has not been added to any Categories. Please help out by adding categories to it so that it can be listed with similar pages. |